TRENDnet's VDV & USB cable tester, model TC-NT3, is a comprehensive cable tester for network professionals. It accurately tests a variety of voice, data, video, and USB cables. The TC-NT3 identifies proper, severed, short circuit, and cross connected pins for cable distances of up to 300 meters. Quick test mode issues a pass/fail for large test batches. All components fit into a convenient travel case.
- Comprehensive cable tester for network professionals
- Tests voice, data, video, and USB cables
- Accurately test pin configurations for cable lengths
- Identifies severed, short circuit, and cross connected pins
- Quick pass/fail for large test quantities
- Blinking hub/switch mode identifies connected hub/switch port
- Convenient travel case
TX/RX troubleshooting
Displays separate TX and RX results for more efficient troubleshooting.
Local and remote testing
A master unit facilitates loop testing and a detachable remote terminal unit allows for cable testing in locations away from the master unit.
Continuous scan
Continuous scan mode is design to accommodate testing with cable ends in different locations.
Manual scan
Manual scan is well suited for loop back cable testing.
Quick test mode
Designed to quickly test large cable quantities, quick test mode identifies a given cable type and then immediately issues a pass/fail for the same cable type.
Blinking hub/switch mode
Designed to confirm which port on a hub/switch a given cable is networked to, blinking hub/switch mode causes the connected network port's LED indicator to blink.
