The Atlona AT-OME-EX-KIT is an HDBaseT extender for video up to 4K/60 4:2:0, plus embedded audio, control, Ethernet, and USB over distances up to 330 feet (100 meters). Part of the Omega Series of integration products for modern AV communications and collaboration, the OME-EX-KIT is HDCP 2.2 compliant and extends IR, RS-232, and IP control signals. The integrated USB extension addresses the challenge of connecting between USB devices at remote locations, and is ideal for software video conferencing and touch or interactive displays. The OME-EX-TX transmitter includes a USB 2.0 host interface for a PC, plus two peripheral devices such as a speakerphone, microphone, or keyboard and mouse. The OME-EX-RX receiver provides two USB interfaces for devices such as a camera, soundbar, or display. The OME-EX-KIT incorporates many popular integration convenience features, while delivering excellent performance and value for 4K presentation and video conferencing applications. The OME-EX-RX remotely powers the OME-EX-TX through Power over Ethernet (PoE). The Ethernet ports on the OME-EX-TX and OME-EX-RX are for IP pass-through.
- Supports any control signal
- Easy to install discreetly
- Remote device powering
- HDCP 2.2 compliant
Supports any control signal
The OME-EX-KIT extends IP, RS-232, and IR control signals, offering many possibilities for remotely interfacing a source or display with a control system, or just a handheld IR remote.
Easy to install discreetly
The transmitter and receiver are low-profile and can easily be installed with minimal visibility under at a table and behind a wall-mounted display.
Remote device powering
The transmitter is powered remotely by the receiver over the HDBaseT cable link. This greatly simplifies installation at a meeting table or any other location, without the need for local AC power.
HDCP 2.2 compliant
The OME-EX-KIT adheres to the specification for High-bandwidth Digital Content Protection, ensuring compatibility with HDCP 2.2 compliant sources, displays, and other equipment.
