The UCS C220 M5 SFF server extends the capabilities of Cisco's Unified Computing System portfolio in a 1U form factor with the addition of the 24 DIMM slots for 2666 MHz DIMMs, two 2 PCI Express (PCIe) 3.0 slots, and up to 10 SAS/SATA hard disk drives (HDDs) or solid state drives (SSDs). The C220 M5 SFF server also includes one dedicated internal slot for a 12G SAS storage controller card. The C220 M5 server included one dedicated internal modular LAN on motherboard (mLOM) slot for installation of a Cisco Virtual Interface Card (VIC) or third-party network interface card (NIC), without consuming a PCI slot, in addition to 2 x 10Gbase-T Intel x550 embedded (on the motherboard) LOM ports. The Cisco UCS C220 M5 server can be used standalone, or as part of the Cisco Unified Computing System, which unifies computing, networking, management, virtualization, and storage access into a single integrated architecture enabling end-to-end server visibility, management, and control in both bare metal and virtualized environments.
Supports dual Intel Xeon Silver processors for enhanced performance
32 GB DDR4 SDRAM with 24 DIMM slots for extensive memory capacity
Dual hot-plug power supplies with 770 W each for reliable power redundancy
10 hot-swap bays for flexible, easy-to-maintain storage solutions
Comprehensive interface options including USB 3.0, VGA, and 10 Gigabit Ethernet for versatile connectivity
Slots2 (total) / 0 (free) x CPU ¦ 24 (total) / 22 (free) x DIMM 288-pin ¦ 1 (total) / 1 (free) x PCIe 3.0 x24 - half-length, half-height (x16 mode / NCSI support) ¦ 1 (total) / 1 (free) x PCIe 3.0 x24 - three-quarter-length, full-height (x16 mode) ¦ 1 (total) / 1 (free) x mLOM
Interfaces2 x USB 3.0 (2 rear) ¦ 1 x VGA - DB-15 (1 rear) ¦ 1 x serial - RJ-45 (1 rear) ¦ 2 x LAN (10Gigabit Ethernet) - RJ-45 (2 rear) ¦ 1 x management (NIC) - RJ-45 (1 rear) ¦ 1 x KVM (1 in front)
Miscellaneous
Included Accessories2 x CPU Heatsink, 32 GB SD Memory Card, Cisco Ball Bearing Rail Kit, 2 x power supply blanking panel, 10 x drive blanking panels, interposer board (8 drive)
Compliant StandardsCISPR 24, EN55024, AS/NZS 60950-1, ICES-003 Class A, UL 60950-1 Second Edition, ACPI 4.0, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, VCCI Class A, FCC CFR47 Part 15 A, GB 4943-2001, CNS 13438 Class A, CAN/CSA C22.2 No. 60950-1 Second Edition, KN35, Directive 2014/35/EU, Directive 2014/30/EU, AS/NZS CISPR 32 Class A, KN32 Class A, EN 55032 Class A, CISPR 32 Class A, EN 300386, EN61000-3-3, EN61000-3-2
Power
Device TypePower supply - hot-plug
Power RedundancyYes
Power Redundancy Scheme1+1
Installed Qty2
Max Supported Qty2
Power Provided770 Watt
Manufacturer Warranty
Service & SupportLimited warranty - replacement - 3 years - response time: next business day